McCall's 7131 Culottes

Red trousers might not immediately sound like a wardrobe essential, but recently I'd been feeling like I could do with some. Then I saw McCall's 7131 was included with last month's issue of Love Sewing magazine, and decided that if I was going to have statement red trousers then I might as well go even more dramatic and have bright red culottes instead.

McCall's 7131 is a pattern for loose fitting trousers, shorts or culottes, with side front pockets, front pleats, a flat front waistband and elasticated back waistband. It has four different length variations, as well a the option to use an overlay. I made view C, which is the second longest option.

Sewing the culottes was pretty simple. The instructions are fairly standard for a commercial sewing pattern. They're concise and not particularly hand-holdy, but I didn't have any trouble understanding them and the culottes came together easily. 

The pattern calls for you to sew channels in the back waistband and use 4 pieces of narrow elastic, but I was feeling slightly lazy and realised that some 1.5" elastic that I had in my stash was just about the right size for the casing without the channels so I decided to use that instead of the narrow elastic. Other than that I did everything else following the instructions.

If you're making this pattern, I'd definitely recommend consulting the finished garment measurements (printed on the pattern pieces themselves) when choosing what size to make. There's quite a lot of ease built into the pattern - if I remember rightly I think there's about 3" of positive ease at the waist. My measurements (waist 32", hips 42") would put me in a size 18 according to the pattern's size chart, but I actually made a 16 and also cut my elastic to be slightly shorter than the pattern calls for and that worked out well. If I'd made an 18 as recommended, they'd have been far too loose at the waist.

The fabric that I used for my M7131 is some red viscose twill from Like Sew Amazing. It's a lovely fabric with a really nice drape. Viscose twill has a little more body to it than viscose challis, and I think it's a perfect weight of fabric for this pattern. Plus at £7 a metre, it's a bit of a bargain!

I think that my idea to make some red trousers/culottes was definitely a good one. I've got lots of tops that I can wear with them, they're beautifully swishy to walk about in and the elastic back makes them really comfy. So maybe red culottes are a wardrobe essential after all - they are for me at least! How about you?

Megan Nielsen Olive Dress and Tops

 When a new pattern comes out, you buy it almost immediately and then make three versions within about a month of owning it, it's a fairly good sign that it's a winner, don't you think? That's what happened for me with the Megan Nielsen Olive dress/top (also available in sizes 14-30 here).

The Olive is a relaxed fit top or dress with a V-insert at the neckline. It has a drop shoulder, various sleeve finishes (bias bound (which I used for all three of my versions) or banded short sleeves, or longer sleeves), dress or top variations (with two top lengths) and an optional breast patch pocket. The dress has a gathered skirt and in-seam pockets.

I've been hankering after a looser fitting dress this summer so that was what initially attracted me to the pattern, but the first version I made was actually the shorter length top. That was mainly because already had the perfect fabric for it in the form of this super pretty floral lawn (now out of stock) from Selvedge & Bolts. I knew I wanted to make a feature of the V-insert so for that I used some white cotton lawn that I have in my stash (I tend to keep a small supply of white lawn because it's useful for bodice linings). 

I loved how my top turned out so I pretty much immediately started planning a dress version. The Olive is a great pattern for playing with stripes so I was on the lookout for some nice stripey fabric and thankfully spotted the perfect candidate in the form of this yarn-dyed linen-cotton fabric from Cloth Spot. It's an excellent quality fabric and is a great pairing for this pattern. It's got a bit of body to it, but will still be lovely to wear on hot days. This dress is so easy to wear and comfy. My only slight disappointment is that I hadn't finished it in time to enjoy it in the heatwave we had a couple of weeks ago!

Now we come onto my third version! My mum really liked both my top and dress so asked me to make an Olive for her, and I was happy to oblige. This version is the full length top. The fabric is from Cloth Spot again - although I think this one is now out of stock apart from a remnant (still available at the time of writing!). This one is a viscose and is nice and drapey. It was slightly 'interesting' to sew because my machine didn't completely love the change in texture when sewing over the woven stripes, but as long as I took it slowly it coped with it OK. And mum is happy with the end result so it's all good!

The Olive is a nice pattern to sew. You have to take a bit of care sewing the V-insert, but you do that first and once that's done it's pretty simple and fairly speedy to sew. 

The instructions are really detailed and easy to follow. They also give you two options for sewing the V-insert - one where the edges end up fully enclosed, and one that is simpler but leaves the edges of the V exposed on the inside. I used the first, apparently slightly trickier option for all of my Olives and it does give a really nice finish. It's not too difficult as long as you're willing to be quite precise. There's also a sewalong for the Olive on the Megan Nielsen blog if you're struggling with anything.

As the Olive has a relaxed silhouette, fitting isn't too complicated. For both of my versions I blended from a 12 at the bust to a 14 at the hips (my measurements are 38-32-42) and added an inch to the length of the top/bodice. For my dress, I also lengthened the skirt by 2" (I'm about 5'9"). My mum's top blends from a 12 at the bust to a 16 at the hips and is the length from the pattern (she's about 5'6").

I love how all three of these Olives turned out. It's a really satisfying pattern to sew and the finished top/dress are lovely to wear. I'm not sure I'll use the long-sleeved version, but I'll definitely be keeping my eye out for pretty fabric for another top or dress version next summer!

Ellie & Mac Discoverer Tees

I've been on a bit of a mission recently to try to reduce the amount of fabric I have sitting around. That's been fairly successful in terms of using up the bigger cuts, but I've still got a fair amount of fabric left over from other projects that needs to be used. I struggle more with using up knit fabric than wovens, so when I came across the Ellie & Mac Discoverer Tee recently I thought it might be a good way to use up some of my jersey.

The Discoverer Tee is a basic t-shirt shape, but with the added interest of a colour block yoke and three sleeve options. I like the fact that the join between the yoke and main section is curved rather than just a straight line. You do need reasonably sized pieces of fabric for the main front and back sections, but the yoke and short sleeves that I used don't take up too much at all.

The first version I made was this one for my mum. Like many people, she had a bit of a wardrobe clearout during lockdown and gave me a couple of dresses that she was no longer wearing for me to refashion. Thankfully the skirt of one of them was just big enough for the main front and back bodice sections, and I had a piece of jersey left from another project that perfectly complemented the darker blue in the print.

The version for my mum turned out so nicely that obviously I decided that I needed one for myself so raided my stash and came up with two monochrome prints that I thought would work well together. The white with the arrows was left over from a Freya top that I made last year, and the black spotty is the remnants from a pair of pyjama trousers I made for my sister-in-law.

Sewing the tees was no problem at all. The instructions seemed good, although I have to say that I only really scanned through them because I'm fairly familiar with sewing a basic knit tee by now. I did deviate slightly from the construction order and added the neckband once I'd sewn the shoulders, instead of after adding the sleeves and sewing the side seems as instructed. I'm just more familiar with doing it that way so find it easier.

I was relieved that the t-shirts turned out well because when I was preparing to make the pattern there were a few things that made be a bit skeptical about it.

Firstly, the sizes are given in ranges rather than as one measurement. Nothing wrong with that at all, but the ranges vary quite a lot in size (e.g. the MED size is quite a small range of bust sizes 35.5-36.25", whereas others have anything up to a 3.5" range - the XXS for example is for bust sizes 29-32.5"), which seems a bit odd to me.

There's also just one piece for the main front and back pieces, and the sleeve is cut on the fold so is a symmetrical piece rather than having slightly more space in the back. I'm no pattern drafting expert by any means, but as far as I know (and having looked at a couple of my other t-shirt patterns) it is more usual for sleeves to allow for more room the back.

There are also no notches at all on the pattern pieces. I thought that was odd to start with, but then it seemed even odder because most of the steps in the instructions start by telling you to mark the centre of the pieces you're going to be joining with a pin, so to my mind it would be better to include notches at those points so you already had them marked.

Going back to the positives - the fit is pretty good for me. My measurements (bust 38", waist 32", hips 42") put me in the middle (at the bust) or just over (waist)/at the top of (hips) the LG size range so that's the size I made. The tee is nicely fitted across the shoulders but looser over the waist and hips so that worked out fine.

The pattern says to add half an inch to the length for every inch you are taller than 5'5", but I'm 5'9" and didn't lengthen the pattern at all and it's still a perfectly good length on me.

Thankfully in spite of my initial reservations about the pattern, the tees both sewed up nicely and turned out well. I'd definitely think about making more of these if I have the right fabric combinations. My mum has also said that she thinks that hers is one of the comfiest t-shirts that she's ever owned (I think she might like another of her own!), which is a fairly good review, don't you think?

Seamwork Dorian Shorts

When Seamwork recently released the Dorian shorts they really appealed to me because they looked relaxed yet presentable. I then realised that I had a piece of linen in my stash left over from an old project that was just the right size for the pattern so it seemed silly not to give Dorian a try!

The Dorian shorts have elastic in the side of the waistband to cinch in the waist but still be comfortable. The shorts close with a zipper fly and button, and also have nicely sized inset pockets that are an interesting design feature.

The skill level is rated as beginner intermediate which I would say is fair. You probably wouldn't want to take this on as your first project because there are quite a lot of pieces and a couple of steps that need a bit of concentration. At the same time, there's nothing particularly complicated about the pattern and the recommended fabrics - medium weight wovens such as twill, denim and linen - are all easy to work with.

The instructions are also really detailed (I'd probably go as far as to say the most detailed I've ever used). They're very clear and illustrated with great diagrams, so if there are any steps that you're not entirely familiar with then they should help you through. I personally had never sewn a zip fly using the method in this pattern, but didn't have any trouble with that step and the fly turned out nicely (even if I do say so myself!).

I also liked the fact that the instructions provide two methods for finishing the waistband/inserting the elastic (one where you attach the elastic and then sew down the inner waistband, and one where you secure the inner waistband and then thread through the elastic) because I think that's the kind of technique where personal preferences can vary quite a lot.

In terms of sizing, my measurements (waist 32", hip 42") exactly match the size 12 for this pattern and that's the size I cut. The only change I made was to lengthen the inseam by 3 inches. I haven't worn shorts for years so I wasn't sure what length I'd like, but I knew I'd want them a little longer than in the pattern. I opted for 3 inches because that was the most I could lengthen the pattern by and still be able to fit it all onto my fabric! I was fairly sure from my toile that 3 inches would be enough and I knew that I would be able to cut a bit off/use a deeper hem if they felt too long. As it turns out, the length feels just right for me. In case it helps for reference, I'm about 5'9".

As I mentioned earlier, the fabric I used is left over from an old project (specifically my Anise jacket - enjoy my old short hairstyle there!). It's a jade green linen that, according to my Anise blog post, I got from Calico Laine - although given that I got it over 6 years ago it's probably unlikely that they still have this exact fabric in stock. It's a good fabric for these shorts and will be nice to wear when it's hot. The colour goes well with quite a few of my summer tops so hopefully I'll get a fair bit of wear out of them this summer - weather permitting of course!

The top I'm wearing the shorts with here is the top hack of the Tilly and the Buttons Marigold that I made last year - blog post here.

I enjoyed sewing my Dorian shorts, and I think they turned out really nicely. They're a good shape on me and, most importantly, they're super comfy! I'll definitely be making at least one more pair because my mum likes my shorts so much that she requested her own for her upcoming birthday. I also quite fancy trying out the member bonus trouser version of the pattern so you might be seeing that at some point in the future. If you're looking for a comfy pair of shorts that are interesting to sew, I can definitely recommend giving Dorian a try!

Make It Simple Juno Pyjamas

One of the benefits of being at home on lockdown is that it seems to be encouraging me to make use of things that I already have. A case in point - in this post I've got a set and a half of Juno pyjamas solely using fabric left over from other projects.

The Juno pyjamas are one of the projects included in Make It Simple, the new-ish book from Tilly Walnes of Tilly & the Buttons fame. The main version of the pattern in the book is for proper pyjamas with long sleeves and full-length legs, but there are pattern pieces included for short sleeves for the top, and instructions on how to adjust the trouser pattern to turn it into shorts.

I first decided to try to give the pattern a go just to make a pair of shorts, as I realised that the fabric I had left over from making my pink Bobby dress last year was exactly the right colour to match the pyjama top in this photo (which I bought ages ago in M&S for a bargain price because it had no bottoms to go with it). Luckily, there was also just enough of it to squeeze out a pair of Juno shorts.

The shorts were really simple to sew and are a nice fit, so I thought I'd have a hunt around in my jersey leftovers to see if there were any other potential Junos hiding there.

Instead of one single piece, I came up with three pieces (the leftovers from my original Bobby dress, a t-shirt I made last year and a recent plain white tshirt that I made) that I thought would all work together and so my hotchpotch Juno set was born! One of the beauties of the shortie version of this pattern is that it doesn't use a lot of fabric so if you're thinking of making it, it's definitely worth looking in your stash to see what options you might have.

The pyjamas are really quick to sew. The sewing time estimated in the book is 2 hours - I think that would be roughly right and I'm not a speedy sewer. The instructions are very clear, including the bit about the adjustments to make to the trousers to turn them into shorts.

I really liked the way the elastic is attached at the waist - instead of sewing a channel at the waist and then threading the elastic through (which is what other pyjama patterns that I've made have done), the elastic is sewn directly to the shorts and then folded over on itself and topstitched to enclose it. It seems quicker to do it that way, although I haven't actually timed it in comparison to the threading elastic method so I'm not sure whether it actually is or not.

In terms of sizing, I made a straight size 6 for these PJs. In Tilly's patterns my bust measurement puts me in a size 5 and my waist and hips put me between a 5 and a 6, but I prefer my pyjamas to be on the looser side rather than tight so going up to a straight 6 seemed to be the best option. My shorts are also quite a bit longer than the length suggested in the book (my inside leg is 11cm instead of 6cm) - again just because of personal preference.

I'm really pleased with my set-and-a-half of Juno pyjamas - they were quick and easy to sew, they used up fabric that might otherwise have gone to waste and they're super comfy to wear. That's the most important thing when it comes to pyjamas really, isn't it?!